DIY SURBO

You LOVE to DIY lets talk about it here...

Moderators: Andy214, vinnie, BlackDolph

Postby Abangk » Wed Jul 09, 2008 10:02 am

I shall volunteer to show how to DIY Surbo unit that worth RM150 in the market on our coming 1st DIY Session (KV)... :D
Image

Equipment & Tools:
1. 30cm x 10cm x 1.5mm thick galvanised iron sheet.
2. Heavy-duty scissors
3. Rivet (not compulsory)

Suction Turbo (Surbo) is a add-on device that will gives power and energy to maximum acceleration power on the lower gears or higher gear and can bring fuel saving up to 10 percent or even more depending how and where you drive. When the Surbo activated, it able to gives a Light Pressure Power up to 0.3 bar and you just need to press half of throttle to Redline.
Last edited by Abangk on Wed Dec 03, 2008 10:34 am, edited 6 times in total.
Best regards
Abangk
Abangk
Central Committee
Central Committee
 
Posts: 1048
Joined: Tue Aug 03, 2004 12:55 pm
Location: 0037-0204-KV

Postby naj4bob » Wed Jul 09, 2008 10:22 am

AbangK,

pastinyer setuju... I'll be join that DIY but maybe we can separate the DIY session via class of the our lion:
- 405(ramai lagi yang pakai sekarang, very reliable car)
- 206(the most cun/cute car of all Lion, mostly youngsters and women's admire this car)
- 306(this car hmmm... susah gak nak nampak but a very good performance-kete orang bujang)
- 406(kereta paling manja dalam keluarga Lion, especially Auto! so banyak perkara boleh share nak tanya)
- 407(damm this Lion make my blood pressure increase man... but I heard the prob of this car 'boleh tahan la' so we can know better)
- Classic Peugeot(404,604,hei... banyak lagi la... I have seeing one 404 still in good running so we also can meet with this Pugster how did they maintain this classic lion)
- High Modification[Engine or Body & Paint Work] (now days a lot of pugsters like to do this modification we can share the knowledge and how to maintain it)

it more easier to other Pugster to participate. Yang basic2 tu pun semestinyer la like how to change a bulb and many more...

Itu suggestion je Abangk, anyway dalam keadaan kegawatan ekonomi sekarang nih sesangat bagus kita belajar buat sendiri, tapi jangan ler sampai workshop punya orang pulak tak boleh cari makan dah ler... :P

naj4bob
naj4bob
Forum Member
 
Posts: 223
Joined: Wed Jun 06, 2007 2:20 pm
Location: 0952-0708-KV

Postby bard » Mon Jan 12, 2009 2:39 pm

tak effect ECU ker
bard
PCM Official Member
PCM Official Member
 
Posts: 178
Joined: Thu Jan 03, 2008 9:59 pm
Location: 1070-0806-TG

Postby iwae » Wed Jan 14, 2009 11:17 pm

tak.
iwan pronounced in kelantanese slang= iwae
iwae
PCM Official Member
PCM Official Member
 
Posts: 633
Joined: Sat Mar 31, 2007 1:04 am
Location: 1016-0802-TG

Postby bard » Thu Jan 15, 2009 1:35 pm

aku kalau kerja2 DIY ni mmg tak beberapa reti dan tak cukup masa...iwae bila balik dungun....tolong DIY kan surbo ni kat 406 aku....hehehehehe
bard
PCM Official Member
PCM Official Member
 
Posts: 178
Joined: Thu Jan 03, 2008 9:59 pm
Location: 1070-0806-TG

Postby perts » Fri Jan 16, 2009 12:03 am

naj4bob wrote:AbangK,

pastinyer setuju... I'll be join that DIY but maybe we can separate the DIY session via class of the our lion:
- 405(ramai lagi yang pakai sekarang, very reliable car)
- 206(the most cun/cute car of all Lion, mostly youngsters and women's admire this car)
- 306(this car hmmm... susah gak nak nampak but a very good performance-kete orang bujang)
- 406(kereta paling manja dalam keluarga Lion, especially Auto! so banyak perkara boleh share nak tanya)
- 407(damm this Lion make my blood pressure increase man... but I heard the prob of this car 'boleh tahan la' so we can know better)
- Classic Peugeot(404,604,hei... banyak lagi la... I have seeing one 404 still in good running so we also can meet with this Pugster how did they maintain this classic lion)
- High Modification[Engine or Body & Paint Work] (now days a lot of pugsters like to do this modification we can share the knowledge and how to maintain it)

it more easier to other Pugster to participate. Yang basic2 tu pun semestinyer la like how to change a bulb and many more...

Itu suggestion je Abangk, anyway dalam keadaan kegawatan ekonomi sekarang nih sesangat bagus kita belajar buat sendiri, tapi jangan ler sampai workshop punya orang pulak tak boleh cari makan dah ler... :P

naj4bob


xmau mskkan 307 dlm senarai ke?...heh... :lol: dlm proses nk membeli ni..
-------------
PUG LOVER

306/307
perts
PCM Official Member
PCM Official Member
 
Posts: 240
Joined: Mon May 26, 2008 9:01 am
Location: 1204-0903-PH

Postby iwae » Sat Jan 31, 2009 6:40 am

bard wrote:aku kalau kerja2 DIY ni mmg tak beberapa reti dan tak cukup masa...iwae bila balik dungun....tolong DIY kan surbo ni kat 406 aku....hehehehehe


lame tak online...
dah balik haritu bro..
Surbo ni amik dr stock air filter 405 sudah,jimat masa.
iwan pronounced in kelantanese slang= iwae
iwae
PCM Official Member
PCM Official Member
 
Posts: 633
Joined: Sat Mar 31, 2007 1:04 am
Location: 1016-0802-TG

Postby ain206 » Sun Apr 19, 2009 10:02 am

salam & good morning

SURBO ni memang bagus. saya dah guna lebih 5 tahun tapi bukan pada peugeot saya. saya pasang pasa van rusa saya. pickup & FC bagus. ada juga rasa nak pasang pada 206 saya tapi kereta masih dlm warranty .

pada van rusa dengan 7 penumpang saya tak ada masaalah utk jejak 150km/h dan naik ke genting selamba saja. FC sekitar 480km bagi setiap 35 liter petrol. Dengan memasang SURBO injin menjadi lebih ringan dan tentunya FC libih baik. Yang penting ianya plug and play. boleh di ubah pada kereta kita yang lain. Di S'pore kereta 405 menjadi kerete pertama yang diuji testimonie nya memberangsangkan. Pasang jangan tak pasang. :)
ain206
PCM Official Member
PCM Official Member
 
Posts: 29
Joined: Fri Apr 10, 2009 3:04 pm
Location: AIN

Postby Abangk » Sun Apr 19, 2009 10:33 am

iwae wrote:
bard wrote:aku kalau kerja2 DIY ni mmg tak beberapa reti dan tak cukup masa...iwae bila balik dungun....tolong DIY kan surbo ni kat 406 aku....hehehehehe


lame tak online...
dah balik haritu bro..
Surbo ni amik dr stock air filter 405 sudah,jimat masa.


Emm.. nak jimat masa memang boleh.. tapi surbo dari 405 tu the flow of the air is very wide as compared to surbo where the air flow is sharp and strong. I used the 405 turbine before but it doesn't improved the pick up cos 405 turbine is used to throw the dust or send to the edge of the tube and there is a scoop around the tube edge to collect the sand and throw it out thru the hole that covered with the rubber valve.

To DIY test is simple, attached the 405 turbine at the tip of the exhaust pipe with tapes and ramp the engine a bit to see the flow of the air, throw some powder a bit if you cannot see the flow. Do the same for surbo to see the difference.. :D
Best regards
Abangk
Abangk
Central Committee
Central Committee
 
Posts: 1048
Joined: Tue Aug 03, 2004 12:55 pm
Location: 0037-0204-KV

Postby perts » Thu Apr 30, 2009 4:06 pm

Abangk wrote:
iwae wrote:
bard wrote:aku kalau kerja2 DIY ni mmg tak beberapa reti dan tak cukup masa...iwae bila balik dungun....tolong DIY kan surbo ni kat 406 aku....hehehehehe


lame tak online...
dah balik haritu bro..
Surbo ni amik dr stock air filter 405 sudah,jimat masa.


Emm.. nak jimat masa memang boleh.. tapi surbo dari 405 tu the flow of the air is very wide as compared to surbo where the air flow is sharp and strong. I used the 405 turbine before but it doesn't improved the pick up cos 405 turbine is used to throw the dust or send to the edge of the tube and there is a scoop around the tube edge to collect the sand and throw it out thru the hole that covered with the rubber valve.

To DIY test is simple, attached the 405 turbine at the tip of the exhaust pipe with tapes and ramp the engine a bit to see the flow of the air, throw some powder a bit if you cannot see the flow. Do the same for surbo to see the difference.. :D


405 turbine ni sy pnah pkai dlu abgk...pd 306 sy yg dlu.....ade pick up jgk...nk pkai surbo plak....nk beze perfomance mcm mne...klau kt kuantan mane nk dpt abgk?
-------------
PUG LOVER

306/307
perts
PCM Official Member
PCM Official Member
 
Posts: 240
Joined: Mon May 26, 2008 9:01 am
Location: 1204-0903-PH

Postby aazul » Fri May 29, 2009 3:30 pm

huhuhuh...
lame tak join tech talk ni...

sorry nak mencelah

actly surbo mmg akan increase sedikit performance kereta...

mcm mana?

Dapat diperhatikan surbo ni berbentuk seperti bilah kipas, tujuan ada bilah untuk memberikan pusaran kepada angin yg masuk melalui penapis udara.

hasil daripada pusaran ini akan memberikan sedikit tekanan udara sekali gus melancarkan lg pergerakan udara.

jadi bila ada bekalan udara yang cukup..maka pembakaran yang sempurna berlaku...sebab tu akan rasa sedikit perbezaan kepada prestasi enjin anda...

peace>>>:)
aazul
Forum Member
 
Posts: 61
Joined: Fri Oct 13, 2006 1:38 pm
Location: 0863-0610-KV

Postby perts » Sat May 30, 2009 12:03 am

aazul wrote:huhuhuh...
lame tak join tech talk ni...

sorry nak mencelah

actly surbo mmg akan increase sedikit performance kereta...

mcm mana?

Dapat diperhatikan surbo ni berbentuk seperti bilah kipas, tujuan ada bilah untuk memberikan pusaran kepada angin yg masuk melalui penapis udara.

hasil daripada pusaran ini akan memberikan sedikit tekanan udara sekali gus melancarkan lg pergerakan udara.

jadi bila ada bekalan udara yang cukup..maka pembakaran yang sempurna berlaku...sebab tu akan rasa sedikit perbezaan kepada prestasi enjin anda...

peace>>>:)


btullll...sape mau custom made twin surbo(aluminium) dgn harge RM50 siap pasang, can PM me...
-------------
PUG LOVER

306/307
perts
PCM Official Member
PCM Official Member
 
Posts: 240
Joined: Mon May 26, 2008 9:01 am
Location: 1204-0903-PH

Re: DIY SURBO

Postby eettcast » Tue Aug 02, 2011 9:24 pm

Abangk> hi, im another newbie, how do we exactly make the surbo, we cant rlly see the whole picture of it, could u kindly show us the whole picture
and where do we install it, and how to do it...is it ok?
eettcast
PCM Forumer
 
Posts: 2
Joined: Tue Jun 14, 2011 1:38 pm

Re: DIY SURBO

Postby ain206 » Mon Sep 12, 2011 11:16 am

read about it here http://www.surbo.net/ and for reseller in malaysia here http://www.surbo.net/malaysia/
ain206
PCM Official Member
PCM Official Member
 
Posts: 29
Joined: Fri Apr 10, 2009 3:04 pm
Location: AIN


Return to DO IT YOURSELF..

Who is online

Users browsing this forum: No registered users and 0 guests